In the houses we live in, door locks are essential as they can ensure the safety of family property. There are many door locks in bedroom rooms, and the keys are easily confused and lost. Therefore, many people are unable to open the bedroom door lock and will face the dismantling and installation of the bedroom door lock. So how to install and dismantle it? Let's take a look together.

Installation of bedroom door locks

1. Open the instruction manual for the bedroom door lock, first look at the installation diagram, and then drill the installation holes for the lock body.

2. Insert the lock body of the bedroom door lock into the hole position in sequence, align it with the set screws, and install screws and connecting screws on the outer panel components. Insert the connecting square rod into the square rod hole of the lock body, align the handle square hole of the outer panel component with the connecting square rod hole. Install the outer panel component.

3. Install the inner panel components. After aligning, tighten the set screw and insert the lock head into the lock hole from the inside out. Insert the screw through the lock body panel hole and align it with the thread of the lock head installation hole before tightening. Install a locking box or locking plate on the door frame.

4. After initial installation, rotate the outer and inner handles to observe whether the inclined weight can be smoothly retracted and extended; Rotate the rear rice knob to feel if the square tongue is smoothly retracted; Insert the key to rotate and feel if the tongue extends and retracts smoothly.

5. After tightening each assembly screw, repeat the above action and test several times. If each action is not smooth, loosen the screw, adjust the position and try again until it is appropriate.

Dismantling of bedroom door lock

In fact, the disassembly of the bedroom door lock is extremely simple, only requiring the following three steps:

1. For many friends, the disassembly of the bedroom door lock may not have been experienced before, but there is no need to worry at all. Experience is accumulated, and what we need to do is patiently learn. Therefore, the first thing we need to do is to use a screwdriver or other hard tool to pry the disk tightly attached to the door loose, and then twist it in the opposite direction of unlocking until it recedes to the back.

2. Next is the disassembly of the bedroom door lock handle: we need to twist the door handle in the direction of the super lock. After we see the small hole above, we can find a small object to insert into the hole to provide support and fixation. This way, we can quickly pull out the part of the handle, which is an important step in our unlocking process. It will be much easier for us to carry out the following operations.

3. After removing the handle, we can easily pry off the disc that has just been loosened by us, use a screwdriver to remove the screw on top, and then go outside the door to pull it out. This way, we can easily and easily complete the disassembly of the bedroom door lock.

The above is an introduction to the installation and disassembly of bedroom door locks. We hope everyone can understand and solve the door problems in a timely manner, making home life more convenient.